For your air conditioner, our technicians will:

• Check and clean the condenser coil
• Check voltage and amperage on motors
• Check and adjust blower components
• Check and vacuum the condensate drain
• Check for proper refrigerant charge
• Check all safety controls
• Calibrate the thermostat (where applicable)
• Lubricate the blower (where applicable)
• Check that the condenser is level
• Check starting capabilities
• Lubricate outside fan (where applicable)
• Apply rust preventative coating to condenser
• Check all electrical connections
• Check temperature drop
• Check the fan on outside condensing unit
• Clean and leak search the evaporator coil (when accessible)
• Inspect the suction line and the liquid line
• Visually inspect duct system
• Inspect the air filter
• Check motor capacitors
• Algae pan tab treatment for indoor coil pan
• Check all electrical connections

For your heating equipment, our technicians will:

• Check thermostat calibration (where applicable)
• Check burner assembly
• Check the air filter
• Tighten all wire connections
• Check and adjust airflow for proper temperature rise
• Check and adjust blower components
• Check and adjust burner operation
• Check heat exchanger for safety
• Check high limit control
• Check fan control
• Check and vacuum condensate
• Check safety circuits
• Clean and leak search the evaporator coil (when accessible)
• Check the flame sensor
• Inspect ignition system
• Visually check ductwork
• Algae pan tab treatment for indoor coil pan
• Check motor capacitors
• Check circuits for proper amp draws
• Reseal furnace and coil doors